SeaCurity Leak Prevention Lid

This leak prevention system consists of a red silicone lid, a handle with soft grip and a 5-meter-long lashing strap.

The silicone lid has a diameter of 26 cm and can therefore seal leaks up to a diameter of max. 20 cm. The silicone lid is put through the leak from the inside to the outside and then secured with the lashing strap inside of the boat so that the leak protection system cannot change its position. The prerequisite is a leak with a minimum diameter of 6 cm.

The handle and the fittings are made of stainless steel, so that the system may be stored in a damp/wet environment.

Due to the water pressure even at shallow drafts, the flexible disc is pressed against the leak from the outside and is also held in place by the lashing strap. It would also be possible to lead a piece of wood through the lifting eye nut at the end of the handle in order to clamp the leak prevention lid, if a reliable lashing cannot be attached.

SeaCurity GmbH

Walhallastraße 38

80639 München

Anrufen

Tel.: +49 89 12711526

Fax: +49 89 12711528

© 2015

SeaCurity GmbH